Textile Fibers: Properties, Finishes, and Classifications
Textile Fiber Finishes and Quality
Cotton Finishes
Mercerization
This treatment uses sodium hydroxide to enhance cotton’s absorbency, luster, and strength.
Cotton Quality
- High Quality: Combed (short fibers removed)
- Lower Quality: Not combed
Linen Finishes
Beetling
This process involves flattening yarns to create a smoother, tighter fabric with enhanced sheen.
Linen Quality
- High Quality: “Line” – Long, combed fibers
- Low Quality: “Tow” – Short flax fibers. Tow fibers require carding before dry spinning into yarns
Textile Fibers: Properties, Finishes, and Classifications
Cotton Finish
Mercerization
– Sodium hydroxide is used to increase cotton’s absorbency, luster, and strength.
Quality of COTTON
- High quality: Combed (removed short fibers)
- Lower quality: Not combed
Linen Finish
Beetling
Yarns are flattened (pounded) to create a fabric that looks more regular and tighter. Also increases sheen.
Linen Quality
- High Quality: “Line” – Long, combed
- Low Quality: “Tow” – Short flax fibers. Line fibers are ready for wet spinning into yarn. Tow fibers must be carded before dry spinning
An Introduction to Ferrous and Non-Ferrous Alloys, Ceramics, and Polymers
Chapter 11: Ferrous Alloys
Iron-Based Principle Constituent
Includes cast irons & steels.
Advantages
- Cost-effective
- Diverse properties achievable by adding vacancy impurities.
Low Carbon Steels
Less than 0.25 wt% carbon. Strengthening is accomplished by cold work. Microstructure consists of ferrite & pearlite (alpha & Fe3C). Relatively soft & weak but ductile & tough. Machinable, weldable, least expensive to produce.
HSLA – High Strength Low Alloy
Contains other elements such as Cu, Vanadium,
Read MoreAn Introduction to Ferrous and Non-Ferrous Alloys, Ceramics, and Polymers
Chapter 11: Ferrous Alloys
Iron-Based Principle Constituent
Ferrous alloys are iron-based and include cast irons and steels.
Advantages of Ferrous Alloys
- Cost-effective
- Diverse properties achievable by adding vacancy impurities
Types of Steel
Low Carbon Steels
- Less than 0.25 wt% carbon
- Strengthening is accomplished by cold work
- Microstructure consists of ferrite & pearlite (alpha & Fe3C)
- Relatively soft & weak but ductile & tough
- Machinable, weldable, least expensive to produce
HSLA – High Strength
Read MoreTextile Fibers: Properties, Finishes, and Classifications
Cotton Finish
Mercerization
-Sodium hydroxide is used to increase cotton’s absorbency, luster, & strength.
Quality of COTTON
- High quality: Combed (removed short fibers)
- Lower quality: Not combed
Linen Finish
Beetling
Yarns are flattened (pounded) to create a fabric that looks more regular and tighter. Also increases sheen.
Linen Quality
- High Quality: “Line” – Long, combed
- Low Quality: “Tow” – Short flax fibers. Line fibers are ready for wet spinning into yarn. Tow fibers must be carded before dry spinning
Respiratory Care of Infants and Children: A Comprehensive Guide
Cold Stress
Cold stress (body temperature <36°C or hypothermia) increases O2 consumption and can cause hypoglycemia, metabolic acidosis, apnea, pulmonary vascular hypertension, and increase right to left shunt. The smaller the infant, the higher the temperature needed to maintain the neutral thermal environment (NTE). The renal system is immature, which makes it difficult to compensate for ventilatory acid-base imbalance. Due to the immaturity of the renal system, the acid-base balance status
Read MoreReal Estate Valuation Fundamentals & Appraisal Process
Valuation Fundamentals: Market Value
Market value is the most probable price a property will sell for under the following conditions:
- Buyer and seller are typically motivated.
- Parties are well informed/well advised and acting in their best interest.
- Reasonable time in the market.
- Payment in cash or its equivalent.
- Traditional financing.
The Appraisal Process
The appraisal process is performed by appraisers and others seeking to establish value. It involves:
- Physical and legal identification of the property.
Introduction to General Systems Theory and Systems Approach
1. Systems Concepts and Definitions
System
A system is a set of elements that interact to reach a goal. It can also be defined as a set of two or more interrelated components working to achieve a common goal.
Life in society is organized around complex systems. Humans try to provide some semblance of order to their universe through various institutions, some structured by humans and others evolved naturally, according to experts.
1.1.1 General Systems Theory
General systems theory describes the structure
Read MoreMarket Risk, RiskMetrics Models, and Loan Types in Financial Institutions
Market Risk and Risk Management in Financial Institutions
Market Risk
Market risk is the risk associated with the uncertainty of a financial institution’s (FI) earnings on its trading portfolio due to changes in market conditions. These conditions include interest rate risk and foreign exchange (FX) risk. Market risk emphasizes the risks faced by FIs that actively trade assets and liabilities rather than hold them for long-term investment, funding, or hedging purposes. It represents the estimated
Read MoreIntroduction to Systems Concepts and Systems Approach
Systems Concepts and Definitions
System: A set of elements that interact to reach a goal. It can also be defined as a set of two or more interrelated components working to achieve a common goal.
Life in society is organized around complex systems. Humans try to provide some semblance of order to their universe through these systems. Life is organized around institutions of all kinds, some structured by humans, while others have evolved over time.
1.1.1 General Systems Theory
General systems theory encompasses
Read More